Installation Guide

15
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Cleanperiodicallywithwarmsoapywaterandcleancottonclothormicrobercloth.Alwaysrubinthe
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
Aftercleaninguseanon-abrasivestainlesssteelpolish/cleaners,topolishandbu󰀨outthestainlesslusterand
grain.Alwaysscrublightly,withcleancottonclothormicroberclothandbu󰀨inthedirectionofthestainless
steel grain.
Cleaning Black Stainless Steel
Cleanperiodicallywithwarmsoapywaterandcleancottongclothormicrobercloth.Toremoveheavier
grease build up use a liquid degreaser detergent.
Duetoabuilt-inlayerofprotectiveanti-smudgecoating,donotusestainlesssteelpolish/cleanerstobu󰀨out
blackstainlesssteel.
Aluminum Mesh Filters
Thealuminummeshltersinstalledbythefactoryareintendedtolteroutresidueandgreasefromcooking.
Theyneednotbereplacedonaregularbasisbutarerequiredtobekeptclean.
Removeandcleanbyhandorindishwasherusinganon-phosphatedetergent.Discolorationofthelter
mayoccurifusingphosphatedetergents,orasaresultoflocalwaterconditions-butthiswillnota󰀨ectlter
performance.Thisdiscolorationisnotcoveredbythewarranty.Spraydegreasingdetergentandleavetosoak
if heavily soiled.
Dryltersandre-installbeforeusinghood.
Removing Aluminum Mesh Filters (Fig 3)
1. Pushinonlterhandles.
2. Pivotfrontoflterdownward.
3. Removelterbypullingawayfromhood.
Replacing Aluminum Mesh Filters
Hood Model: Part No. Qty. to Order.
AK1124x 50200013 2
AK1100x/AK1136x 50200012 2
AK1200Bx/AK1236Bx 50200012 2
Maintenance – Cleaning and Filter Removal
Fig 3