Use and Care Manual

17
Breeze I & Breeze II Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
AK11 Ductless Recirculation Conversion
An air recirculating kit (optional) must be
purchased before using hood in recirculat-
ing mode.
Recirculating kit - 0AK11-21001
ŮĚřŚŚĚśřřřŚ
1. Secure each of the (2) spring clips to the
safety grille body (A). Do this by inserting
the screw through the spring and into the
clip. Secure each clip to the safety grille
body by using a philips head screwdriver.
śĘŮŮ
holder and place it over the safety grille
body
ŜĘŮ
grill body by lifting up on spring clips and
twisting. The clip should cover the lip of
ŮĘ
4. Remove each screw from recirculating
top plate. Plate is located on top of hood
towards the front.
NOTE: Skip the recirculating preparation pages if you are ducting the air out of your home.