Owner's Manual

22
Tempest I Use, Care, and Installation Guide
TEMPEST I
UNDERCABINET
PRO
Installation Instructions
PBD-1200A Dual Blower Installation
This range hood is equipped standard with a single blower vertical duct option. To convert from
single blower vertical ducting to dual blower vertical ducting please following the instructions below.
PBD-1200A dual blower kit compatible only with AK7036CS, AK7042CS and AK7048CS models.
1. Disconnect blower plug.
2. Remove (4) screws at top of
hood body attaching blower to
blower plate. Remove blower from
interior of hood body.
3. Remove (4) screws from interior
of hood body attaching blower
plate to hood body. Remove
blower plate.