Recirculating Kit Manual

ManualsBrandsZephyr ManualsCooking AppliancesCabinet Insert Range Hood with 3-Speed 600 CFM Motor, Electronic Touch Controls, Dual-Level LED Lighting, Hybrid Baffle Filters, Airflow Control Technology, Recirculating Option, and UL Listed: 30" Width

ZRC-9100A Recirculating Kit Instructions

(2) charcoal filter

(8) C clips (1) 7" to 6"

adapter

top of cabinet

FEB15.0101

1. Remove mesh filter from hood and place

charcoal on the top of mesh filter. Secure

charcoal filter by 4 C clips from recirculation

kit, 2 C clips for each enlongated side of

charcoal filter, FIG.1.

2. Reinstall mesh filter.

3. Charcoal filter must be replaced after every

120 hours of use or approximately every

3 to 4 months based on an average daily

use of 1 hour of cooking time.

4. Install 7" to 6" adapter on the top of hood,

FIG. 2.

FIG. 1 FIG.2

FIG. 3

FIG.3

FIG. 4

FIG.4

FIG.5

FIG. 5

screw (1 in each corner

of return air vent)

4. Install 7" to 6" adapter to the return air vent

and use tape to secure. FIG.2.

1. Cut a 6 1/2" round opening in top or the

cabinet where the ducting will connect to the

return air vent and 7" to 6" adapter. FIG.3.

2. Connect 7" round ducting from blower collar to

return air vent collar. Return air vent collar will

go around the ducting. Secure with duct tape.

3. Secure return air vent to top of cabinet with (4)

screws.

1. Cut a 6 1/2" round opening in soffit ceiling

where the ducting will connect to the return

air vent and 7" to 6" adapter. FIG.4.