Troubleshooting guide

PAGE 10
C
OMPUTER OPERATION
DISPLAY FUNCTIONS
DISPLAY FUNCTIONS (Continued)
CALORIE COMPUTER ACCUMULATES TOTAL CALORIE CONSUMPTION (BURN) DURING
A TRAINING PERIOD. COMPUTER WILL COUNT IN 1 CALORIE INCREMENTS, FROM 0
TO A MAXIMUM READING OF 9999 CALORIES.
PRESET A TARGET CALORIE BURN: USE THE MODE” BUTTON TO SCROLL TO THE
CALORIE FUNCTION AND PRESS THE “UP OR DOWN” BUTTONS. SETTINGS CAN BE
ENTERED IN INCREMENTS OF 10 CALORIES AND THE COMPUTER WILL COUNT
DOWN FROM THE SET CALORIE VALUE. ONCE THE CALORIE FUNCTION IS SET,
START PEDALING TO BEGIN TRAINING OR PRESS THE “MODE” BUTTON TO
CONTINUE THE TARGET SET UP OF OTHER FUNCTIONS.
NOTE: THE REPORTED CALORIE DATA IS ONLY A REF
ERENCE GUIDE FOR THE USER.
IT SHOULD NOT BE USED IN COMPARISON OF CALIBRATED MEDICAL EQUIPMENT.
TRAINING NOTE: EACH FUNCTION WILL ALWAYS RESET TO A ZERO VALUE AFTER A PRESET TARGET
IS ACHIEVED. THE COMPUTER WILL AUTOMATICALLY START COUNTING UP FROM
ZERO IF A USER CONTINUES TO TRAIN (PEDAL) AFTER REACHING A TARGET
VALUE .
FEATURES
AUTO START COMPUTER WILL ACTIVATE ONCE A SENSOR SIGNAL IS DETECTED (PEDAL OR ARM
MOVEMENT).
SLEEP MODE COMPUTER WILL AUTOMATICALLY STOP DISPLAYING FUNCTION READINGS
AFTER 5 MINUTES OF NOT RECEIVING A SENSOR SIGNAL.
NOTE: START PEDALING TO REACTIVATE THE COMPUTER.
TIME & TEMP THE COMPUTER WILL ALWAYS DISPLAY THE ROOM TEMPERATURE AND
TIME WHEN THE OTHER FUNCTIONS ARE NOT IN USE OR COMPUTER IS IN A
SLEEP MODE.