Troubleshooting guide

ASSEMBLY STAGE #1

Attach Stabilizers to the Main Base

Assembly Hardware Required:

#22 Carriage Bolt Qty. 4 #24 Acorn Nut Qty. 4

#23 Spring Washer Qty. 4

Assembly Description:

A) Assemble the Front Stabilizer Assembly (#2) to the Main Base Assembly (#1) using 2-Carriage Bolts (#22),

2-Flat Washers (#23), and 2-Acorn Nuts (#24). Note: Make sure that the transport wheels on the Front Stabilizer

are facing away from the Main Base Assembly as shown.

B) Assemble the Rear Stabilizer Assembly (#3) to the Main Base Assembly (#1) using 2–Carriage Bolts (#22), 2

–Flat Washers (#23), and 2–Acorn Nuts (#24).

C) Use the Adjustable Levelers on the bottom of the Stabilizer Assemblies to adjust the bike and keep it from rocking

on an uneven surface (Figure 1).

 Assembly Step #1 completed.

SSEMBLY INSTRUCTION P AGE 4

Adjustable Levelers

Figure 1