Installation guide

19
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are
not hot.
Remove by turning bulb counter clockwise.
Note: Bulb does not unscrew; it turns 60
degrees, stops and falls out.
If bulbs are diffi cult to turn due to prolonged use,
fi rmly attach the provided glass suction cup and
turn. You may also use a rubber/latex glove to
grip the bulb with the palm of your hand and turn.
Replacement bulbs are available on our website,
part number Z0B0020. (GU10 120V 50W.)
Maintenance – Lights