Owner's Manual

ManualsBrandsZephyr ManualsIsland Mounted HoodsZephyr 54 Inch Wide Island Range Hood Less Blower from the Trapeze Series

9

Installation – Blower Preparation

INTERNAL BLOWER PREPARATION

1. Remove internal blower ﬂ ange from motor

housing by (6) screws.

2. Secure internal blower to internal blower ﬂ ange

by (4) M4*16 screws from internal blower

hardware.

3. Secure AC power wiring box to internal blower

ﬂ ange by (2) M4*8 screws.

4. Secure ground wire to underside of internal

blower ﬂ ange by (1) 3/16*3/8 screw and (1)

washer.

5. Connect 9 pin molex connector from capacitor

cable to 9 pin molex connector from internal

blower.

6. Re-install internal blower ﬂ ange to motor

housing by (6) screws previously removed from

step 1.