Installation Instructions

6
REMOVING THE GLASS SHELVES:
1. Open the door completely.
2.
3.
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
Note: The cooler may experience decreased cooling eĸciency if air ŇŽǁ is restricted due to a fully
loaded cabinet.
REMOVING THE WOODEN SLIDE SHELF:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf ƚŽǁĂƌĚƐ yourself ƵŶƟů it is fully extended ŽƵƚǁĂƌĚ
4. The shelf has ƉůĂƐƟĐ posts on both sides as indicated in the diagram beloǁ While facing the unit, press
the ƉůĂƐƟĐ post on the right side ĚŽǁŶ ǁŚŝůĞ pulling up on the leŌ plasƟc post. You may choose to do this
by hand or by using a ŇĂƚŚead screǁdriver.
5. Evenly pull out the shelf from the track ƵŶƟů it is completely removed from the inner compartment.
Push in glass shelf lock pin (1).
With lock pin pushed in, pull out the shelf (2)