Use, Care and Installation Guide

12
Installation Instructions
Carbon Filter
A built-in carbon filter protects your beverages by acting as a natural barrier against
harmful odors. The carbon filter should be replaced every 3-6 months depending on the
unit’s exposure level to odor. If the unit is placed in a kitchen, regular replacement every
three months is ideal.
Remove the carbon filter by turning counterclockwise to unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004
Installation Clearance Requirements
When installing the wine cooler under a counter, follow the recommended spacing
dimensions shown.
 To ensure proper service access and ventilation, allow between 1 – 2 inches of
clearance at the back as shown in the diagram.
 The installation should allow the unit to be pulled forward for servicing, if
necessary.
 An installation next to a wall will require a minimum 2-1/4” door clearance to
accommodate the handle.
 Once you are ready to install the unit in a cabinet or directly on the floor, you must
adjust the feet to level the wine cooler.