Hood User Manual
28
Milano Use, Care, and Installation Guide
MILANO
WALL
CORE
ACT™ Conversion
ůĬĻĭ
Some local codes limit the maximum amount of CFM a range hood can move. ACT™ allows you 
to control the maximum blower CFM of select Zephyr Ventilation range hoods without the need for 
expensive make up air kits. ACT™ enables the installer to easily set the maximum blower speed to one 
of three most commonly specified CFM levels; 590, 390, or 290 CFM. The usage of ACT™ may not be 
necessary for your installation. Please check your local codes for CFM restrictions.     
Hood must be disconnected from the main power prior to 
performing the conversion instructions listed below. Failure to do 
so could result in personal injury or damage to the product.
CAUTION
After re-positioning the jumper and powering on the hood, the 
CFM cannot be changed again.
CAUTION










