ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS AUG06.
Model:ZSA/ZSV Page 1
Model:ZSA/ZSV Page 2 Model:ZSA/ZSV Page 3
. Fasten screws to wall (see below) as marked. 6. Hang hood onto screws and hang tighten (fig. A). ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS Z0F-C022 Z0F-C022 Z0F-C022 Z0F-C022 2 2 2 2 Note: Whenever possible, the hood should be secured to wood studs celling and/or wall ,, with minimum thickness 3/8 .
ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS Model:ZSA/ZSV Page 6 Z0F-C022 Z0F-C022 Z0F-C022 Z0F-C022 2 2 2 2 Model:ZSA/ZSV Page 7
MAINTENANCE WARRANTY LIGHTS TO OBTAIN SERVICE UNDER WARRANTY: You must present proof of original purchase date. Please keep a copy of your dated proof of purchase (sales slip) in order to obtain service under warranty. Replacing Light Bulbs CAUTION: Light bulb becomes extremely hot when turned on. DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
