INSTRUCTION FOR USE EN 1
TUTTOSTEAMY INDEX EN 1 OVERVIEW OF TUTTOSTEAMY - PWC-301 page 04 16 DISPOSAL INFORMATION page 20 2 FUNCTIONS AND FEATURES page 05 17 WARRANTY STATEMENT page 20 3 CONTROL PANEL page 06 4 SAFETY FEATURES page 06 5 TECHNICAL DATA page 06 6 WARNINGS page 07 7 CLEANING - PRACTICAL ADVICE page 08 8 STEAM CLEANING - PRACTICAL ADVICE page 09 9 GETTING STARTED page 10 10 WATER RE-FILL page 12 11 USAGE OF ACCESSORIES page 13 12 IRONING page 15 13 CLEANING AND MAINTENANCE
EN 1 - OVERVIEW OF TUTTOSTEAMY - PWC-301 1 2 3 4 4B 5 5B TUTTOSTEAMY body Wheels Power cord Main switch Main switch light (orange) Heating switch Heating switch light (green) 6 7 8 9 10 11 12 Water level indicator light Steam pressure indicator light Pressure indicator Safety valve Steam intensity regulator Hose connection socket Quick coupler plug LIST OF ACCESSORIES 29 30 31 32 33 34 35 Domestic iron Rubber mat Flex tube with plug Extension tube Triangular brush Wiper 22x22 cm Floor wiper 44x32 cm
2 - FUNCTIONS AND FEATURES 1. Steam Cleaning & Disinfection 2. Steam Ironing With the TUTTOSTEAMY professional iron, any fabric can be ironed (following the instructions on the labels) or clothes can be freshened up. You can use TUTTOSTEAMY on different surfaces LARGE SURFACES SMALL SURFACES UPHOLSTERY GLASS SURFACES • Tiled floor, parquet, stone and linoleum floor. • Wax-treated tiled floor (for wax removal). • Tiles or tiled walls. • Roller shutters, guillotine windows. • Carpets.
EN 6 3 - CONTROL PANEL • 4 Main switch • 4B Main switch light (orange) • 5 Heating switch • 5B Heating switch light (green) • 6 Water level indicator light • 7 Steam pressure indicator light 4 4B 5B 7 5 6 4 - SAFETY FEATURES • Service pressure switch • Service thermostat • Safety thermostat • Steam control on the waterproof handle • Tamper-proof cap with pressure release valve • Stainless steel boiler 5 - TECHNICAL DATA DATA PLATE CHARACTERISTICS WARNING! Make sure the technical data on the data p
6 - WARNINGS This Operation and Maintenance Manual uses the symbols indicated below, in order to draw your attention to important information. DANGER WARNING ATTENTION IMPORTANT / NOTE Warning of possible serious or fatal injury. Warning of possible minor injury or material damage. Warning of possible damage or destruction of the device. Additional information and helpful hints for the correct use of the device.
EN 12. Do not use the appliance in the presence of explosives, highly flammable materials, gas or naked flames. 13. • This appliance can be used by children aged from 8 years and over and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children must not play with the appliance.
8 - STEAM CLEANING - PRACTICAL ADVICE WARNING! Furniture surfaces can be cleaned with the steam cleaner in keeping with the following conditions: • Do not clean furniture surfaces with the direct steam jet. • Always use a soft, absorbent cloth. • Apply little steam pressure. • Do not apply pressure when cleaning.
EN 10 9 - GETTING STARTED ATTENTION! For first time use, the following operation is recommended. 9.2 CONNECTING OR REMOVING THE FLEX TUBE (31) a) Lift the socket cover b) Insert flex tube into the socket (11) (picture C). The pin has to be turned upwards and inserted into the socket cover opening (picture D). WARNING! Make sure the power cord is not plugged in before you start. ATTENTION! Lay TUTTOSTEAMY on a flat and steady surface. 9.
Parallel pressure indicator (8) starts to show current steam pressure. 3. When green heating indicator (5B) is on, steam can be released. Fa Fb NOTE: TUTTOSTEAMY is equipped with a safety valve that prevents the valve from opening as long as steam pressure is high. Current steam pressure can be monitored by looking at the steam pressure indicator (8). Fc Fd To connect the rectangular (36) or triangular (33) brush, the brush coupling (37) needs to be attached (pictures Fa - Fd).
EN 10 - WATER RE-FILL If during steam cleaning the orange water level indicator light (6) comes ON, the water level is too low and a re-fill is necessary. In this case 1. Disconnect TUTTOSTEAMY following the instructions in point 5 of chapter 9 “Disconnecting TUTTOSTEAMY”. 2. Turn the steam intensity regulator knob (10) to position 0. 3. Let the device cool. Current steam pressure is shown on pressure indicator (8).
11 - USAGE OF ACCESSORIES CAUTION! Every time an accessory is changed or replaced, the main device has to be disconnected. The accessories heat up during use. Be careful when replacing or removing them. Do not work with wet feet or hands. 11.1 EXTENSION TUBE (32) Each accessory can be connected directly to flex tube (31) (picture K) or to extension tube (32) (picture L). 11.
EN 11.4 WINDOW WIPER (40) The window wiper is for easy cleaning of glass and other smooth surfaces TRIANGULAR BRUSH (33) - WIPER (22X22CM) (34) This cotton cloth is specially devised for the triangular brush (33). 1. Place the triangular brush (33) on the cloth (34). 2. Wrap the cloth around the brush. (picture S; Sa) WARNING! When the outside temperature is around freezing point, the glass of the window should be quickly sprayed with steam at a distance of 10 -20 cm.
12 - IRONING 1 Iron body 2 Steam locking button 3 Iron temperature regulation dial 4 LED temperature indicatiors 5 Steam push button 6 Iron status LED light 7 Iron power cable with plug 8 Ceramic soleplate 9 Rubber mat 1 2 3 4 7 5 8 6 9 FUNCTION Rubber mat Insulated protection to rest the iron on Steam switch (Pressure key) Steam release during ironing.
EN vertical position, it will automatically go into standby. The iron status LED light and power LED light will flash. To re-activate the iron, just start ironing again. IRONING WITH THE STEAM IRON CAUTION! Follow the ironing instructions are for the laundry or clothes to be ironed. Direct the first steam jet onto a separate cloth. While ironing, only press the steam button at a suitable distance. Let the iron slide lightly over the laundry. No excessive pressure is required.
13 - CLEANING AND MAINTENANCE NOTE: All maintenance jobs must be carried out only when the appliance is cold and unplugged. CAUTION! • Before carrying out any maintenance or cleaning, remove the plug from the socket. • Do not empty the boiler if there is still hot water inside.
EN 18 14 - TROUBLESHOOTING DANGER! • Repairs must only be performed by a Zepter Service Centre and in accordance with national and local safety regulations. Unauthorised repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorised repair work. NOTE: Despite proper use of the appliance, problems may occur. The following table shows some of the possible problems and their corresponding solutions.
15 - USE OF ACCESSORIES 31 36 40 39 32 38 34 35 PARQUET ✔ ✔ ✔ ✔ ✔ WOOD ✔ ✔ ✔ ✔ ✔ LINOLEUM ✔ ✔ ✔ ✔ ✔ MARBLE/ STONE ✔ ✔ ✔ ✔ ✔ CERAMIC ✔ ✔ ✔ ✔ ✔ SKIRTING BOARDS ✔ ✔ ✔ ✔ ✔ CRACKS ✔ ✔ ✔ ✔ ✔ CREVICES ✔ ✔ ✔ ✔ ✔ SHUTTERS ✔ ✔ ✔ ✔ ✔ RUGS ✔ ✔ ✔ ✔ ✔ UPHOLSTERY ✔ ✔ ✔ COUCHES ✔ ✔ ✔ WINDOWS ✔ DELICATE FURNITURE/ LACQUERED SURFACES ✔ ✔ ✔ ✔ ✔ PLASTIC COATED ✔ ✔ ✔ ✔ ✔ ACCESSORIES 29 Domestic iron 30 Rubber mat 31 Flex tube with plug 32
EN 16 - DISPOSAL INFORMATION At the end of its lifecycle, we recommend making the machine safe by cutting off the power cord. Do so only after unplugging it from the mains! In accordance with art. 13 of Legislative Decree no.
