Instruction manual

Glossary Jester Operating Manual
Jester Manual 73-403-00 Issue 3.4 49 of 53
X-fade
Another name for Crossfade. A smooth fade from one scene to another, with pre-
defined up and down fade times.
XLR
The connector range used for the DMX input, DMX output and Power connectors on
the back of the Jester. There are various different XLR connectors available,
primarily 3-pin (used for Audio and some cheap DMX devices), 4-pin (used for power
and colour scrollers) and 5-pin (used for DMX devices). Note that you should never
connect a device with a 4 pin XLR to any other device unless they were built to be
used together. Different manufacturers use different voltages on these pins, and
misuse could result in damage to one or both devices.
Yellow
The colour of the PROGRAM/GO button when the desk is in PRESET mode.
Zero 88
The manufacturer of the Jester.