Instruction manual

JesterML Operating Manual Setup Mode
50 of 85 73-406-00 Issue 3.0
Leaving DMX Patch Mode
To leave DMX Patch Mode, use the cursor buttons to move to select <OK> then
press ENTER. If any fixtures or RDM devices remain unpatched then a warning will
be given. No warning is given if preset channels are unpatched since this is a
commonplace normal operating condition. You will be returned to the Setup menu.
If you wish to discard any changes that you have made to the DMX Patch and
restore the previous patch, then use the cursor buttons to move to select <OK>, and
while holding down SHIFT, then press ENTER.
Assigning Fixtures
To assign your fixtures, you must first enter Setup. To do this, hold down SHIFT and
press the MODE button for 1 second. Once in Setup, use the cursor buttons to
navigate to <Assign Fixtures> and press ENTER
The main screen in the Assign Fixtures menu allows you to view fixtures already
assigned on the desk. Fixtures can be selected either with the left and right cursor
buttons or with the Multi-Function-Keys.
If you need to un-assign a fixture, simply select it, and hold down the CLEAR button
for a short duration until it‟s name is blanked. However don‟t keep the button held
down for too long after that, or you will unassign all fixtures.
To un-assign all fixtures, hold down the CLEAR button for a longer duration until all
fixture names are blanked from the Multi-Function-Keys. No warning is given and no
undo is possible.
To add new fixtures, navigate to <Add Fixtures> on the Main LCD, and then press
ENTER. You will now be presented with 4 choices on the Multi-Function-Keys:
 Fixture Library – this selects fixture profiles from the main fixture library
stored on the desk. The fixture library contains over 1900 different fixture
types from 140 manufacturers. This library is regularly added to and updates
are available from the Zero 88 website.
 User File – this selects fixture profiles from a file which was previously loaded
from USB. Note that old user files stored internally can be cleared from the
<Update Fixture Lib> menu if required.
 USB – this selects fixture profiles from a file on a USB memory stick. If the
fixture you want to use cannot be found in the fixture library, this is the option
you will need. You can create the profile information for it using the Fixture
Type Editor utility supplied on the CD with the desk (a Windows® PC and a
USB Memory Stick are required). This is also available from the Zero 88
website, together with a support forum where you may find another user has
already created the fixture profile information you need and uploaded it. The
desk will take an internal copy of the file so that it can be used again in future
without the need to reload it again from memory stick.