Instruction manual

Setup Mode JesterML Operating Manual
73-406-00 Issue 3.0 55 of 85
Clearing Memories and Submasters
If you wish to clear the memories and submasters, select <Clear Mems/Subs>.
Press ENTER and the desk will ask you to confirm whether you wish to clear these
areas of the desk. Use the cursor buttons to select <OK>, and press ENTER. The
memories and submasters will be cleared, and you will be returned to the Setup
menu.
Clearing Palettes
If you wish to clear the palettes, select <Clear Palettes>. Press ENTER and the desk
will ask you to choose which attributes to clear. Use the COLOUR, BEAMSHAPE
and POSITION keys to toggle the setting for each attribute; <Yes> means that all
palettes of that attribute will be cleared, <No> means that palettes of that attribute will
not be cleared. Use the cursor buttons to select <OK>, and press ENTER. Palettes
of the chosen attributes will be cleared, and you will be returned to the Setup menu.
Just before clearing the palettes, the desk will first search all memories and
submasters for references to those palettes. If any references are found, then they
will be removed and replaced with the value from the palette before the palette is
cleared. Once cleared, the link between memories / submasters and palettes on
which they were built is permanently broken.
Resetting the Desk
If you wish to clear ALL memories, submasters, palettes, the fixture assignment and
DMX patch, and all Setup options; use the cursor buttons to select <Reset Desk>.
Press ENTER. The desk will ask you to confirm the action – use the cursor buttons
to select <OK>, and press ENTER. The desk will be returned to factory defaults, and
you will be returned to the main Setup menu.
Updating the Fixture Library
The JesterML has a comprehensive built-in library of over 1700 different fixture types
from 125 manufacturers. This library is regularly added to and updates are available
from the Zero 88 website. To see which version of the library is installed on the desk,
select <Update Fixture Lib> and press ENTER. The version number of the library will
be displayed on the Main LCD. If no library is installed (this may happen if a previous
update failed for some reason), then V--.-- will be displayed.
If you wish to update the library with a newer version from the Zero 88 website, then
download the file and unzip it to the root directory on a USB Memory Stick. The USB
Memory Stick must contain the .IFT file – the JesterML is not able to unzip a .ZIP file
itself, nor navigate subdirectories. Plug the USB Memory Stick into the desk, then
use the cursor buttons to select <Update Library> and press ENTER. Now choose
the correct .IFT file using the up and down cursor buttons. With <OK> selected,
press ENTER, and the new version of the fixture library will be installed on the desk.
Once complete, press ENTER, and you will be returned to the previous menu and
the new library version will be displayed.