Specifications

48
MX Rack
Key Features
MX Rack
n
Plug-in modular Dimmer rack
n
All load outputs, control signal, and main
power terminals accessible from the front
of the rack
n
1.2kW, 1.8kW, 2.4kW, and 6kW dimmer
module capacity
n
Incandescent dimmer rise times of 350,
500, and 800μS
n
Universal fluorescent dimmer modules
for 2, 3, and 4 wire dimming ballasts
n
User programmable control module
n
Integral main circuit breaker option
n
User configurable panic input
assignments
n
Custom SCR rise times and custom
curves are available for Incandescent,
Low voltage. Non-incandescent loads
available
n
Interfaces with photocells, occupancy
sensors, and building management
systems
n
100,000 A.I.C. rating available (option)
n
Real-time dimmer feedback (DIS) option
n
U.L. and c-U.L. listed
The MX System provides the latest in
dimming technology, including offline
programming via a handheld programmer,
user assignable patchable DMX inputs,
backup memories with remote access,
and LCD status indicators. The unique
3 phase vertical bus bar allows up to 96
dimmers to be sequentially numbered
in the cabinet with no two consecutive
dimmer modules on the same phase.
The MX System is suitable for medium
to large theater installations as well
as architectural dimming systems.
Sophisticated enough to satisfy the
theater professional, it also provides
simple programming and troubleshooting
for a general facilities manager.
Access
All load outputs, control signal inputs and
main power terminals are accessible from
the front of the rack.
Control Input
All dimmer control electronics are
contained in one plug-in control module.
Providing two optically isolated DMX-512A
inputs and up to twelve 0 to +10V analog
inputs. Controller also features 4 digital
I/O ports for access to stored pre-sets and
panic buss control.
Convenience Panels
Each rack is supplied with a convenience
panel containing a breaker protected 20A
60Hz 120VAC grounded duplex power
outlet.
Overview
Note: Zero 88 products are designed to work seamlessly
with iLumin/iLight products or standard DMX protocol
systems by others.
Load Types
n
Incandescent
n
Low voltage
n
Fluorescent
n
2 wire fluorescent loads
n
3 wire fluorescent loads
n
4 wire fluorescent loads
n
Neon/cold cathode
n
Non-dim (switched)