Specifications

54
Key Features
1008 Automatic Transfer
Switch
n
UL 1008 listed for emergency use
n
Single phase or three phase power
n
Available in 2, 4, 6, or 8 load Circuit
(4, 8, 12, or 16 Pole) 120/240VAC,
120/208VAC, 240/415VAC, 277/480VAC
n
Front Panel Status Lamps
n
Normal Power OK Lamp
n
Emergency Power OK Lamp
n
Sensing circuitry integral to cabinet
n
Isolated relay outputs for activation of
other devices, e.g. generator start circuit,
fire alarms, etc.
n
Relays are electrically energized/
mechanically held
n
Transfer of hot and neutral for each
circuit between normal and emergency
power
n
Continuous monitoring of normal and
emergency power
n
Convenient contactor connections using
clearly marked phase voltage lugs and
termination strips
n
Adjustable time delay for cross-over
The Automatic Transfer Switch is UL 1008 listed for emergency use. It transfers a load circuit
from its normal supply, for example an architectural control system, to a back-up supply in
the event of power failure.
Control of the load circuit is automatically returned to the normal supply when power
is restored.
Note: Zero 88 products are designed to work seamlessly
with iLumin/iLight products or standard DMX protocol
systems by others.
1008 Automatic Transfer Switch
Overview