Specifications

58
Key Features
EDI Big Stik
n
No derating. 100% full duty cycle for
10 and 20 Amp units
n
Overheat and over current protected
n
Convection cooled with thermal sensor
n
Dims standard or low voltage
incandescent, quartz sources within the
same enclosure
n
1Ø or 3Ø power input
n
DMX-512A control
n
LED indicators
n
Assignable work-light control
n
Automatic 50/60Hz Detection
n
UL listed
Save Space and Money
The Big STIK is a portable, affordable, high
performance dimmer system. With its
space saving design, the Big STIK offers
the best value in the market. Power this
flexible dimmer system with a 3Ø 20 Amp
twist lock connection or hardwire it for
permanent installation. Weighing less than
50 pounds, it can be mounted vertically
or horizontally in nearly any location. Its
lightweight design and unique mounting
hardware allows the Big STIK to fit into
any environment. The Big STIK requires
only power, a DMX source, and lights
for operation.
Inputs and Outputs
The Big STIK accepts the industry
standard 5 pin XLR style DMX connector
for optically isolated signal inputs. An LED
indicates the presence of a DMX signal.
The Big STIK is furnished with a DMX
output connector that allows the control
signal to "daisy chain" through any
additional STIKs or other remote devices.
Power a Variety of Loads
The Big STIK is capable of driving
incandescent and quartz loads. It even
controls low voltage lighting fixtures.
Overload conditions are protected by
circuit breakers at the outlets to avoid
common failures.
Create the Look
With the DMX controller on line, the Big
STIK responds to the commands of the
signal generator, providing smooth, even
lamp output with no flickering or stepping.
EDI Big Stik
Overview
Note: Zero 88 products are designed to work seamlessly
with iLumin/iLight products or standard DMX protocol
systems by others.