Specifications
DD-2 | 2-Wege DMX-Verteiler
• DMX Verteiler mit einem Eingang und zwei Ausgängen
• Absolute elektrische Isolation zwischen Eingang & Ausgang,
bzw. Ausgang & Ausgang
• doppelte DMX Buchsen (3pol & 5pol) für jeden einzelnen Kanal
• Jeder DMX Ausgang besitzt einen unabhängigen Treiber
• Eingang und Ausgang mit Stromversorgung und interner 50mA Sicherung
• DMX distributor with one input and two outputs
• absolutely electronical isolated between input and outputs
• two types of DMX connectors for each channel (3- and 5-pin XLR)
• each DMX output features an independent driver
• input and output with powersupply and intern. fuse 50mA
DD-2 Code BODD2
Stromversorgung | power supply 230V 50Hz
Eingangssignal | input signal 1 x DMX-512 (3-/5-Pol XLR)
Ausgangssignal | output signal 4 x DMX-512 (3-/5-Pol XLR)
Gewicht | weight 1,5kg
Abmessungen BxTxH | dimensions WxDxH 200 x 130 x 20mm
30
Lichtelektronik |
lighting electronics
F
Botex
DC4P
DC-4P Code
Klemmleiste | screw terminals BODC4PB
Schuko | schuko BODC4PG
Harting | Harting BODC4PH
Stromversorgung | power supply 230V 50Hz
Ausgangsleistung | output power 6 x 6A, max. 20A
Eingangssignal | input signal 0-10V analog, DMX 512, XLR 3-pol.
Gewicht | weight 5,6kg
Abmessungen BxTxH | dimensions WxDxH 19”/2HE, 482 x 325 x 88mm
A-410 | Lauflichtsteuerung mit 4 x 4A Dimmerpack
• 4-Kanal Lauflichtsteuerung mit 4 x 4A, max. 16A Dimmerpack
• 18 wählbaren Programmen
• Audiosteuerung über eingebautes Mikrofon, abschaltbar
• Empfindlichkeits- und Geschwindigkeitsregler
• Drei-Stufen-Schaltung pro Kanal: Statisch an/Lauflicht/Aus
• Lauflichtrichtung umkehrbar, Auto-Reverse
• “Full On” Flashtaste
• Bulgin- oder IEC Lastausgänge
• 4-channel chaser controller with integrated dimmerpack 4 x 4A, max. 16A
• 18 chaser programs with sound-to-light mode via internal microphone, on/off
switchable and control of speed and sensivity
• three modes per channel: static on/chaser/off
• chaser with auto reverse function
• Bulgin or IEC outputs
A-410 Bulgin Code BOA410B
A-410 IEC Code BOA410K
Stromversorgung | power supply 230V 50Hz
Ausgangsleistung | output power 4 x 4A
Audiosteuerung | sound-to-light integriertes Mikrofon
Gewicht | weight 1,8kg
Abmessungen BxTxH | dimensions WxDxH 19”/1HE, 482 x 265 x 44mm
DC-4 Bulgin Ausgänge
DC-4 Bulgin Outputs
DC-4 Harting & Schuko Ausgänge
DC-4 Harting & Schuko Outputs
DC-4 Schuko Ausgänge
DC-4 Schuko Outputs
DC-4P | Lauflichtsteuerung mit 4 x 5A Dimmerpack
Preiswerte Lauflichtsteuerung mit integriertem 4x5A Dimmerpack. Es sind Versio-
nen mit Bulgin-, Schuko- oder Harting-Lastausgängen erhältlich.
• 16 vorgegebene Chase-Programme (Half/Full Programm wählbar)
• Modus Funktion: Dimmer halten / Sound halten / Prog. Sound / Prog. Chase /
Auto Chase / Auto Sound Fade Zeit / Full On und Standby
• Chase Geschwindigkeit: Normal und 10-fach
• Sound to Light: 1) Wenn Hold Sound gewählt ist, werden die Lichteffekte von
4 verschiedenen Musikfrequenzen gesteuert 2) Wenn Prog. Sound gewählt ist,
können Musik Levels Chase Geschw. steuern
• Audio Funktion: Integriertes Mikrophon oder extern
• Output Signal: 0-10V Output (1 x 8 pins Din-plug)
• DC Input: 15-24V
Budget priced chaser controller with integrated 4 x 5A dimmer pack. Versions with
Bulgin, Schuko or Harting outputs are available.
• 16 vorgegebene Chase-Programme (Half/Full Programm wählbar)
• Modus Funktion: Dimmer halten / Sound halten / Prog. Sound / Prog. Chase /
Auto Chase / Auto Sound Fade Zeit / Full On und Standby
• Chase Geschwindigkeit: Normal und 10-fach
• Sound to Light: 1) Wenn Hold Sound gewählt ist, werden die Lichteffekte von
4 verschiedenen Musikfrequenzen gesteuert 2) Wenn Prog. Sound gewählt ist,
können Musik Levels Chase Geschw. steuern
• Audio Funktion: Integriertes Mikrophon oder extern
• Output Signal: 0-10V Output (1 x 8 pins Din-plug)
• DC Input: 15-24V