TABLE OF CONTENTS COPYRIGHT .........................................................................................................................3 1.INTRODUCTION ...............................................................................................................4 PRODUCT OVERVIEW ...........................................................................................................4 WIRELESS SPECIFICATIONS ...................................................................................
OVERVIEW .........................................................................................................................63 UPGRADING THE PRINT SERVER FROM PSADMIN...................................................................63 UPGRADING THE PRINT SERVER FROM WINDOWS NT/2000/XP (THROUGH TCP/IP) ...............63 UPGRADING THE PRINT SERVER FROM UNIX (THROUGH TCP/IP) ..........................................64 UPGRADING THE PRINT SERVER FROM BROWSER .............................................
Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976.
1. Introduction Product Overview The external print servers enhance capability by letting you place your printers, plotters, or equality printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Network Management The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a warning. A standard SNMP agent is permanent on these print servers.
Components and Features Wireless Print server ˙1 Bi-direction parallel port (IEEE 1284) or USB 1.1 port (support USB2.0 full speed) ˙POST (Power On Self Test) ˙ LED Lights Status: Yellow color, indicating Power/POST process WLAN Active: Green / Yellow color, indicating the strength of radio signal and data transmission. ˙1 CD for Netware, Windows 95/98/Me/NT/2000/XP ˙1 external AC power adapter(3.
Hardware Installation To install the print servers, you need to complete these steps: ˙Confirm that your printer parallel(USB) port work well. ˙Connect the print server to the network and printer(s) and plug in the print server. ˙Create a configuration page from the print server. Follow these instructions to install the print servers, please refer to any peripheral you are connecting to the print server: 1.
2. Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server supports industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. This means that the print server supports the most popular network operating systems today, including NetWare, Windows 95/98/Me/NT/2000/XP, UNIX systems and Macintosh computer.
95/98/Me print server from Netscape Windows private LAN as NT/2000/XP/2003 soon NetWare 3.12, 4.x, 5.x HP Web JetAdmin Windows Remote NT/2000/XP/2003 management of NetWare 3.12, print server, 4.x, 5.
3.The PSAdmin Utility for Windows-based The PSAdmin is a proprietary Windows based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be run from any Windows PC. Installing the PSAdmin To install PSAdmin, please follow the directions listed below. 1. Insert the Setup CD into your CD-ROM drive. 2. Run the setup.exe from Windows 95/98/Me/NT/2000/XP/2003. The Network Print Monitor for Windows welcome message then appears.
4. After installation completes, the Setup Wizard message appears. 5. Click Wireless Setup Wizard and the following message appears.
6. Click NEXT , the wizard will automatically discover the wireless print server. 7. Select the print server which you want to configure and press NEXT.
8. Select YES if you want to change the configuration and press NEXT then the picture appears. Communication Type： please choose Infrastructure, Ad-hoc or 802.11b Ad-hoc that meet your network environment. SSID：Input the proper SSID of your wireless network. The default value is and it will connect with the AP which has the best signal in your wireless network. Channel： optional. Data Transmit Rates： Auto or 1,2Mbps, 5.5Mbps or 11Mbps. Click NEXT. 9.
10. Specify a fixed IP address or use dynamic IP address, then click NEXT. 11. In this page, you can confirm your setting value again. Click NEXT.
12. Done.
Using PSAdmin After PSAdmin is successfully installed, run the program by double-clicking the PSAdmin icon from “Network Print Server” program. The screen will then appear as follow picture. All print server(s) feature Novell NetWare function on the LAN will be displayed along with their respective device name, MAC Address, print server name, firmware version, and status. The terms are defined as follows: Device Name: The name of the print server hardware used for identification purposes.
2 Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an IP address to the device, please skip to the following step. 3 In the IP Address option, type an IP address for the print server. The IP address must meet the IP addressing requirements of the network segment.
NetWare Wizard 1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Click Wizard button just like a picture ＜ picture. ＞.and select NetWare Wizard, as follow 3. Select the NetWare File Server to which the print server device will be attached. 4. Type in a Print server. 5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8.
4. Click Properties in the tool bar and the following screen will appear, Properties button just like a picture ＜ ＞, as follow picture. 5. Select NetWare and type in the Print server that created during PCONSOLE. 6. (Optional) In Bindery Settings, Select NetWare file server(s) that print server can do Bindery mode. 7. (Optional) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print server can do NDS mode. 8. Click OK.
Obtain an IP address from a DHCP server: This option enables or disables the DHCP feature of the print server. When this option is enabled, the print server will obtain an IP address automatically from the DHCP server on your LAN. The default value is “Disable”. Note: 1.Once this option is enabled, the following IP address, Subnet Mask, Gateway will be grayed out and are not available for editing. 2.
Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrade button just like a picture ＜ ＞, as shown as follow picture 2. Select General Upgrade. Make sure that the upgrade file is located in the same directory as PSAdmin. Reset 1. Click Reset button just like a picture ＜ ＞. 2. Reset allows the user to reset the print server device in order to establish a new connection or for new settings to take effect.
Note: Configure the print speed in the Advanced label, must match the printer’s speed which connect to the print server. Undependable configuration will cause printer to abnormal printing. Multiple Print Queues Configuration To configure the print server to service multiple print queues, please follow the instructions listed below: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. Run the PSAdmin from your Windows.
Procedure: 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Add/Remove Programs icon. 3. Click Change or Remove Programs tab. 4. Select Network Print Monitor Change/Remove button. 5. The un-installation wizard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure.
4.Internet Printer Connection and HP Web JetAdmin IPP Overview Print server(s) support the Internet Printing Protocol (IPP). Using the appropriate software on your system, you can create an IPP print path from your system as Windows PC over the Internet. Note: For incoming print path requests, the network administrator have to configure the firewall to accept incoming IPP requests.
6.In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp1. ** Three ports should be the port name as lp1, lp2, and lp3. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK. 8. Select the appropriate printer manufacturer and printer type and click “Next”, appear as follow picture.
9.If you want your Windows-based programs to use this printer as the default printer, please select “Yes”, and Click Next. It will appear as follow picture 13. Click Finish button. 14. Done. HP Web JetAdmin Overview HP Web JetAdmin allows you to use a Web browse to revise, view, manage and diagnose devices connected to the print server or any standard printer MIB devices. For more information about a procedure or Windows in the HP Web JetAdmin software, see about HP’s relation document.
Note: When installed on a supported host server, HP Web JetAdmin can be accessed from any client through a supported Web browser by browsing to the HP Web JetAdmin host. Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the installation files from HP Customer Care Online at http://www.hp.com/go/webjetadmin/. Follow the instructions on the screen to install the HP Web JetAdmin software.
Removing HP Web JetAdmin Utility To remove HP Web JetAdmin software from your web server, use the uninstall program provided with the software package.
5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for example, IE 4.0, Netscape 4.0 or above is recommended. The embedded web server provides access to configuration and management pages for the print server and the connected peripheral device. Using Embedded Web Server Before you can use the embedded web server, the print server must be configured with an IP address.
System Status 1.Click Status, it then appears the sub-menu. 2.Click System, it then as shown in the following picture. Device Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This option allows you to view contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to view Location name of the print server.
Printer Status 1.Click Status, it then appears the sub-menu. 2.Click Printer, it then as shown in the following picture. Manufacture: This option allows you to view manufacturer of the printer. When the printer connected with the print server, it will be show in the manufacture box. Model Number: This option allows you to view model of the printer. When the printer connected with the print server, it will be show in the model box.
Mode: This option shows the wireless operation mode of your print server. AP’s MAC Address: This option shows the MAC address your wireless AP. SSID: The ESSID of your wireless network. Channel Number: Current channel number. Data Transmit Rate: Current transmit rate. WEP Encryption: The status of WEP encryption. TCP/IP Status 1.Click Status, it then appears the sub-menu. 2.Click TCP/IP, it then as shown in the following picture.
Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. Subnet Mask: This option allows you to view subnet mask from the print server.
General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time. NetWare NDS Setting: Use NDS Mode: Enable or Disable. Name of the NDS Tree. Name of the NDS Content. Current Status: Connect or Disconnect. NetWare Bindery Setting: Use Bindery Mode: Enable or Disable.
SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server. AppleTalk Status 1.Click Status, it then appears the sub-menu. 2.Click AppleTalk, it then as shown in the following picture.
Data Format: This option allows you to view data format from the print server. If you are using a PostScript printer you can select ASCII, TBCP or BCP format from web configuration. Setup Menu Meanwhile, you have finished the IP address configuration with print server. You should use web browser to configure the print server. The setup menu of the print server helps administrator to setup the print server’s System, Printer, NetWare, TCP/IP, SNMP and AppleTalk.
System Contact: This option allows you to input contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to input Location name of the print server. To confirm the print server’s location name where the print server is located in the office’s LAN. Password: This option allows you to input setup password of the print server.
Basic Settings: Mode: Infrastructure, Ad-hoc or 802.11b Ad-Hoc. Select SSID or Manually Enter SSID Below: You can use Site Survey to help you assign a SSID or input in manually. Channel: Specify a Channel number that meet your enviromemt. Data Transmit Rates: Choose the transmit rate of your wireless print server. WEP Settings: USE WEP: Disabled or Enabled. Key Format: Alphanumeric or Hexadecimal. WEP key: Input your WEP key in this field. Printer Setup (parallel print server only) 1.
TCP IP Status: 1. Click Setup, it then appears the sub-menu. 2. Click TCP/IP, it then as shown in the following picture. DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to input IP address from the print server. The IP address must meet the IP addressing requirements of the network segment.
Print Server Name: This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues. Logon Password: This option allows you to input encrypted password from the print server. The print server login to NetWare server that administrator set password from selected print server. NDS Mode: To Enable NDS Mode, if you want to setup NDS environment.
Installing Print Server on NetWare 4.x/5.x Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x NDS Bindery Emulation. When you install the NetWare file server for the first time, by default, the installation program will automatically set up the Bindery Emulation function for you by adding “SET BINDERY CONTEXT =” in the AUTOEXEC.NCF file. By default, the bindery context will only be set on your organization (O) object.
Note: Please refer to NetWare’s Print Server/Services manuals for detailed PCONSOLE commands. SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in the industry as a solution for remote network management and monitoring of networking devices. SNMP actually includes a protocol, a database structure specification, and a set of database objects.
MIB Object Names system.sysContact Description Indicates the network administrator's name. system.sysName Indicates the print server's name for identification. system.sysLocation Indicates the location of the print server. snmp.snmpEnableAuthenTraps Enables or disables the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. Users can set up print server’s SNMP functions by using their browsers. 1.
Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol.
4.Port Name: In this option, type a name for identification purpose or just leave it in default (recommended). Note: The default print server’s Chooser name is as shown as follows: -xxxxxx-1, where xxxxxx represents the last six digits of the device’s Node ID. For example: ATALK_PS-40EEED-1. You may also change the to a name you like for identification purpose in this option. The print server will append the last six digits to the name you specify. 5.
6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC. Select A Desired Protocol TCP/IP The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation” section in this chapter.
TCP/IP Protocol Installation 1. Click Start, point to Settings and select Control Panel. 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6. Select TCP/IP Protocol from the Network Protocols list. 7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP server is available on the LAN. 8. Restart the computer. 9. Done.
NetBEUI Protocol Installation 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Network icon. 3. If the NetBEUI is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6. Select NetBEUI from the Network Protocols box and follow the instructions on the screen. 7. Restart your computer for new settings to take effect. 8. Done.
9. Type in the Printer Name and click Next. 10. A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.” Select No and click Finish. 11. Double-click the newly created Printer Name icon. 12. Select Printer and Properties. 13. Click Details tab and select Add Port. 14. In the Add Port dialog box, select Other, as shown in the following picture. 15. Select the Network Print Port and click OK. 16.
By default, the computer will first search for the print server(s) on the network by using the IPX/SPX protocol. If the IPX/SPX protocol is installed, the print server will be displayed along with its Node ID, as shown in Node column. (The last 6 digits of the Node ID, located on the back of the print server unit). Select one of the print server’s ports from the list. If the IPX/SPX protocol is not installed, no print server will be shown in the display box.
1. Click Start, point to Settings, and select Control Panel. 2. Double click the Add/Remove Programs icon. 3. Click Add/Remove tab. 4. Select Network Print Monitor for Windows 95/98/Me and click Add/Remove button. 5. The un-installation wizard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure. Note: We recommend you restart your computer after un-installation is finished. 7.
DHCP, we strongly recommend you manually specify a fixed IP address to the print server. By default, the print server’s DHCP function is disabled. Windows NT LPR Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer. 3. The Add Printer Wizard screen will appear, Select My Computer and click Next. 4. Click Add Port. 5. From the Printer Ports box as shown in the following picture, select the LPR Port. 6.
11. Select Shared. Type in a new Share Name or leave it in default and click Next. 12. A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.”, Select Yes (Recommended) and click Finish. 13. Done. Windows 2000/XP Standard TCP/IP Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer, Click Next. 3.
6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next. 7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1. 8. Click OK, and Next.
Note: Please DO NOT type any other name than lp1 in this step. 9. Click Finish. 10. Select the appropriate printer manufacturer and printer type list and click Next. 11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Finish. 13. Done.
UNIX Installation After the IP address is assigned, the Print Server is ready to be configured. For some popular UNIX systems, SCO OpenServer and UnixWare, Sun Solaris, IBM AIX, and Linux, we include the detailed installation procedures below. If you can’t find the installation procedure corresponding to your UNIX system, please refer to your UNIX manuals for details about configuring your UNIX for the “remote printing system”. SCO UNIX (OpenServer 5.0.x) 1. Login root 2.
After this step, the Remote Printer Configuration appears. Answer the questions as follows: a. Do you want to install or remove printing (i/r/q) ? [q] : -----> i b. Do you wish to change the printer description file /etc/printcap (y/n) [n] ? ---------> y c. Enter information for remote printers or local printers accepting remote printing requests Please enter the printer name (q to quit): --->printer-1 You can enter a printer name you like in this option. d.
4. Type “tftp < Print server‘s IP address>” For example: tftp 192.72.214.103 At the tftp prompt, type “get config.txt” to get the Print Server‘s configuration file. For example: tftp > get config.txt 5. Quit from tftp, and then use your editor to modify the “05 BoxIPAddress” field in the config.txt file from 0.0.0.0 to the IP address you specify in Step 2. 6. (Optional) Modify the "06 Gateway" field from 0.0.0.0 to your gateway's IP address. 7. (Optional) Modify the "07 SubnetMask" field from 0.0.0.
4. 5. 6. 7. 8. 9. 10. 11. Select Device. Select Printer/Plotter. Select Printer Spooling. Select Add a Print Queue. Select Remote. Select Standard Process. In the Queue Name option, type in a printer name. For example: printer-1 In the Host Name option, type in the IP address of the Print Server. Note: You can add the host name associated with the IP address in the /etc/hosts file. If you have done this, please use the host name instead of the IP address. 12.
f. Click New button. g. Click Forward button.
h. In the Name field, type a user-defined name, click Forward. i. In the Queue Type field, choose Networked UNIX. j. In the Server field, type the IP of print server k. In the Queue field, type a print server’s port name which connect to the printer. For example: lp1. l. Click Forward button.
m. In the Printer field, choose Postscript Printer. n. Choose the model of printer and click Forward. o. Done.
UnixWare 7 1. Login root. 2. Run CDE (Common Desktop Environment). 3. Open the subpanel under the SCO icon in the Front Panel. 4. Select SCO Admin. 5. Select Print Setup Manager from System Administration window. 6. Click LPD icon in the tool bar of Print Setup window. 7. In Name field, type a name for the printer for identification purpose. 8. In Protocol field, select lpd(BSD). 9. Select your printer’s make and model from the Make/Model list. 10.
8.Upgrading Print Server Overview Upgrading print server will allow you to replace its firmware inside the print server while the newer software version of the print server is available from your local dealer. Depending on the different systems users might use, this chapter is divided into several Sections, please refer to the following list for your systems. 1. Upgrading the print server from PSAdmin 2. Upgrading the print server from Windows NT/2000/XP 3.
5. Done! Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type “tftp ”. 4. At tftp prompt, type “get upgrade”. 5. Change to binary mode. 6. At tftp prompt, type “put mpsXX.bin”. 7. Wait for the file transfer to complete. 8. Quit from tftp. 9. Done. Upgrading the print server from Browser 1. Ensure binary file is located in your current working directory. 2.
5. Click Upgrade. 6. Done.
9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support. LED Light Indicators The print server is equipped with seven LED lights to assist in diagnosing problems that are the result of the network and/or the print server hardware itself.
are damaged. In addition, check the cable connection. If the pins are damaged, contact your dealer for a replacement connector.
11. Repeat the Steps 8-12 for the other Ethernet adapter. 12. Restart the computer. 13. Done. Moving the print server to A New Segment If the print server is moved from one network segment to another after the initial installation, through the Network Print Port, the print server must be reconfigured on the original Windows NT server or on each Windows 95/98 computer using this print server in order for the print server’s driver on each computer to re-establish a new connection.
9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and your computer is going to be moved onto another segment, you have to reconfigure the print server on your computer to use your print server. However, this situation is like moving the print server to a new segment. Please refer to the “Moving the print server to a new segment” section for more detailed reconfiguration instructions.
B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this is the case, please consult your network administrator to obtain an unused IP address for your print server. C. The print server is on one segment and your Windows NT server is on the other segment.
5. Type "edit config.txt" to modify this configuration file. 6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as default and do not change their values. When done, save this new file and quit from your editor. Please note, in this step you must specify an IP address which is valid on Segment B, such as 192.72.214.100 in this example, rather than 192.72.214.68. 7. Type, for example, "tftp 192.72.214.68 put config.
Appendix: Diagnostic Mode If you had problems to setup your print server in your wireless network, please refer to the following steps: 1. Change the print server to diagnostic mode by switching the DIP switch to DIAG mode(the side near to power connector.) 2. Change your wireless adapter to 802.11b Ad-hoc mode, and the ESSID is WLAN-PS 3. Run PSAdmin to discover the print server. 4. Select the wireless print server 5.
6. 7. Done! The print server will restart. 8. Switch the DIP back to normal mode and change your wireless adapter setting. Load Default Value You can load the default value of wireless print server by press the reset button. Please press 5 to 10 seconds until the status LED flash 4 times and the default value is restored.
Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanations 1. The Print server Name/Print Queue configuration in PCONSOLE is incorrect. 2. The Print server name specified and stored in the print server memory doesn’t match the same one set in PCONSOLE. 3. The network cable or power adapter connected to the print server is loose or disconnected. 4. The printer is off-line, jammed or out of paper. Solutions 1. 2. 3. 4.
Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports “Create Print server Error”, “Create Printer Error”, or “Create Print Queue Error” while using Auto Setup.
Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the printer named “Panasonic KX-P6100 PCL” or “Panasonic KX-P6300 PCL”, or “Panasonic KX-P6500 PCL” to the print server through the Network Print Port. DO NOT redirect the printer named “Panasonic KX-P6100 GDI”, “Panasonic KX-P6300 GDI”, or “Panasonic KX-P6500 GDI” to the print server.
