User's Manual

5. Configuration from Embedded Web Server

Overview

The Print Server contains an embedded web server that can be accessed through a

supported web browser on a LAN, for example, IE 4.0, Netscape 4.0 or above is

recommended.

The embedded web server provides access to configuration and management pages for the

print server and the connected peripheral device.

Using Embedded Web Server

Before you can use the embedded web server, the print server must be configured with an IP

address. There are many ways to configure the print server’s IP address. For example, the

Windows-based of PSAdmin utility can easily set an IP address with the print server, please

see the Properties – TCP/IP options of chapter 3.

After an IP address is established on the print server, perform the following step:

Status Menu

Once you have finished the IP address configuration with print server. You should be use

web browser to view and management the print server. The status menu of the print server

helps administrator control the print server’s System, Printer, NetWare, TCP/IP, SNMP and

AppleTalk of status for the time being.

Preparation

Enter the IP address of the print server as the URL, for example, 192.168.10.132. Then the

print server’s home page will appear in content of the web browser.

Please follow this information in the status menu of the print server: