User's Manual

37
Basic Settings:
Mode: Infrastructure, Ad-hoc or 802.11b Ad-Hoc.
Select SSID or Manually Enter SSID Below: You can use Site Survey to help you assign a
SSID or input in manually.
Channel: Specify a Channel number that meet your enviromemt.
Data Transmit Rates: Choose the transmit rate of your wireless print server.
WEP Settings:
USE WEP: Disabled or Enabled.
Key Format: Alphanumeric or Hexadecimal.
WEP key: Input your WEP key in this field.
Printer Setup (parallel print server only)
1. Click Setup, it then appears the sub-menu.
2. Click Printer, it then as shown in the following picture.
Bi-directional: This option allows you to select the bi-directional of the print server. There
are two ways to select this option, includes Disable or Auto Detect.