Instructions / Assembly
26oz TUMBLER with 5 stage filter
USE & CARE INSTRUCTIONS
Do not use with water that is
microbiologically unsafe or of
unknown quality without
adequate disinfection before
or after the system.
ZeroWater recommends
changing your filter after the
Filter Change resin completely
changes color or when your
filtered water reads 006 ppm.
For parts and service needs
please contact 800-503-2939.
8.
ENJOY
delicious, 99.6%
TDS-free water
on the go.
7.
INSERT
straw and
tighten lid.
6.
FILL
the tumbler reservoir
carefully so the water
does not overflow.
5.
PLACE
reservoir back inside
the tumbler.
REMOVE
Tumbler lid and
reservoir.
CLEAN
Please make sure you hand-wash the
bottle and reservoir with soap and
water and completely rinse and dry
each component before using.
UNWRAP
FILTER
Remove &
discard wrap
and/or blue cap.
TWIST
filter into bottom of
reservoir. Tighten until
there is a complete seal
between filter, o-ring,
and reservoir.