Instruction manual

Memories
Solution & Solution XL Operating Manual – Issue 1.0 Page 101
Inserting Memories
The Solution & Solution XL desk provides the facility to insert up to a
maximum of 99 point memories between two whole number memories.
The point memories are referenced using decimal notation. For example,
the point memories that could be inserted between memory numbers 3 and 4
would be 3.01, 3.02 … 3.09, 3.1, 3.11, 3.12 … 3.19, 3.2, 3.21 … 3.29, 3.3 ….
3.9, 3.91, 3.92 … 3.99.
Memories are inserted one at a time and can only be inserted after a selected
memory. The desk displays the insert numbers available with a mid point one
selected by default. You can choose the default one or select one of the other
available insert numbers.
Example 1: Memories 3 and 4 have been programmed. Select memory 3 and
press the INSERT key. The Memories screen displays insert memory
numbers 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the
default. You can then set up dimmer and fixture parameter values and
program memory 3.5 or select one of the other insert options and program
that. Once the insert memory has been programmed, the Memories screen
only displays the programmed memories, ie 3, 3.5 and 4.
Example 2: Memories 3, 3.5 and 4 have been programmed. Select memory
3.5 and press the INSERT key. The Memories screen displays insert memory
numbers 3.6, 3.7, 3.8 and 3.9 with 3.7 selected as the default. You can then
set up dimmer and fixture parameter values and program memory 3.7 or
select one of the other insert options and program that. Once the insert
memory has been programmed, the Memories screen only displays the
programmed memories, ie 3, 3.5, 3.7, 4.
Example 3: Memories 3 and 4 have been programmed. Select memory 3 and
press the INSERT key. The Memories screen displays insert memory
numbers 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the
default. Press the INSERT key again. The Memories screen displays insert
memory numbers 3.51, 3.52, 3.53, 3.54, 3.55, 3.56, 3.57, 3.58 and 3.59 with
3.55 selected as the default.
Notes - Inserting Memories
A memory cannot be inserted in the following places:
Between a whole number memory and its first insert (eg 2 and 2.01)
Between two consecutive insert memories (eg 3.47 and 3.48).
Between the last insert and the next whole number memory (eg 7.99 and
8)
If any of the above illegal inserts are attempted, an error message is
displayed on the Main LCD and monitor.
Transferring Memories
The Solution & Solution XL desk provides the facility to transfer a single
programmed memory or a range of programmed memories onto a submaster.
Press the MEMORIES key to display the Memories Window on the Main LCD
and monitor. Select the single memory or the first memory in the range to be
transferred. Hold down the SHIFT key and press the COPY key. The Transfer
Memory window is displayed on the Main LCD and monitor:
Figure 82 - Transfer Memory