Instruction manual

Submasters
Page 116 Solution & Solution XL Operating Manual – Issue 1.0
Deleting a Submaster
Press the SUBMASTERS key to display the Submasters Window on the Main
LCD and monitor. Select a programmed submaster to be deleted. Press the
DELETE key. The Delete Window is displayed on the monitor:
Figure 100 - Deleting a Submaster
Select the [OK] button. A confirmation window is displayed. You can then
confirm the deletion or cancel the operation.
Playing Back Submasters
The dimmer and fixture data programmed directly onto a submaster or in a
transferred memory is output by raising the submaster fader to the required
level or using the corresponding SUBMASTER FLASH button.
The way that the data is output depends on how the submaster is
programmed (ie direct scene, direct chase, transferred scene or transferred
chase) and also on the various submaster parameters (fade times, trigger
levels etc.)