Instruction manual

Groups
Solution & Solution XL Operating Manual – Issue 1.0 Page 121
Recording a Group
Press the FIXTURES key (if the MFKs are not already fixture selection keys).
Select the fixtures to be recorded into the group.
Press the GROUP key to make the MFKs group selection keys.
Use the PAGE UP or PAGE DOWN keys to select the required page.
Press and hold down the corresponding group MFK for two seconds. The LED
in the group MFK is lit when the group has been recorded.
Naming a Group
Hold down the SHIFT key and press the GROUP key to display the Group
Window. Select a programmed group to be named. Press the NAME key.
The Name Window is displayed on the monitor:
Figure 102 - Naming a Group
Use the MFKs or external keyboard to enter the group name as required, then
select the [OK] button to complete the operation.
Copying a Group
Hold down the SHIFT key and press the GROUP key to display the Group
Window. Select a programmed group to be copied. Press the COPY key.
The Copy Window is displayed on the monitor:
Figure 103 - Copying a Group
Enter the destination (To) group number and then select the [OK] button to
confirm the operation.
If the destination group is unprogrammed – the source group is copied to the
destination group.
If the destination group is programmed – a warning message is displayed.
You then have the option to overwrite the group or cancel the copy operation.