Instruction manual

Introduction
Solution & Solution XL Operating Manual – Issue 1.0 Page 13
Submaster Controls
Submaster Faders
The Submaster faders are used to output channel data (scenes) or chases.
The fader controls the output level of the intensity channels and triggers the
LTP channels in the programmed data.
Submaster Flash Buttons
The Submaster flash buttons, located below each of the submaster faders are
used to flash, solo or latch the data programmed on the submaster. The
action of these buttons is user definable via the Submaster Setup Window
(accessible by holding SETUP and pressing SUBMASTERS). These buttons
are also used to select submasters when in the Submaster Window.
Submaster Page Controls and Display
The current Submaster Page (1-20) is indicated on the dual seven segment
display.
The PAGE UP and PAGE DOWN keys are used to select the required
submaster page.
Pressing the PAGE UP and PAGE DOWN keys together selects submaster
Page 1.
Submaster Step Button
The Submaster STEP button is used to manually step through any chases
with manual drive being output on the submasters, or to initiate Beat tempo
matching.