Instruction manual

Introduction
Solution & Solution XL Operating Manual – Issue 1.0 Page 17
RECORD - used for programming memories and submasters.
COPY - used to copy items from one location to another (eg memories,
submasters, groups, palettes etc.) Holding down SHIFT and pressing COPY
is used to transfer a memory onto a submaster.
INSERT - used to insert point memories, add or insert chase steps or add or
insert duplicates when patching dimmers and fixtures.
DELETE - used when deleting items (memories, submasters, groups, palettes
etc.)
ENTER - used for completing commands and selecting „soft‟ buttons on the
Main LCD, monitor screens and popup windows.
HOME - used as a quick method for setting all the parameters, or all the
parameters for a particular attribute to their home values. The Home values
are found in the Edit Fixtures table in Setup and can be adjusted as required.
GRAND MASTER - controls the final output values of all dimmer and fixture
intensity channels, resulting from the Program Window, Playback X and
submasters. The Grand Master level is displayed on the monitor screen.
BLACKOUT - reduces the outputs of all dimmer and fixture intensity channels
to zero. Pressing the BLACKOUT key toggles between active and not active.
The red LED in the BLACKOUT key flashes when blackout is active.
SHIFT - used in conjunction with various front panel controls to provide
additional functions, eg holding SHIFT and pressing the COLOUR key
displays the Colour Palette Window on the monitor.