Instruction manual

Quick Start Guide
Page 22 Solution & Solution XL Operating Manual – Issue 1.0
Selecting the Next Memory
After a cue is run, the selected (highlighted in yellow) memory will
automatically move on to select the next programmed memory. To select a
different memory to be output next – move the cursor to the Next memory
number field, then use the + and – keys or the UP and DOWN arrow keys to
select the next memory to be output. The Next memory to be output is
highlighted by a yellow bar.
Using the GO Button
When a memory is triggered by the GO button, the Intensity, Colour,
Beamshape and Position fades will occur in the times programmed. If
necessary, all fades may be controlled by the OVERRIDE and PAUSE
controls on the front panel. To resume a paused fade, press the GO button.