Instruction manual

Quick Start Guide
Solution & Solution XL Operating Manual – Issue 1.0 Page 27
Assigning Fixture Type to MFKs
Having selected the required fixture type and specified a DMX start address,
you now tell the desk where you would like these fixtures to be. Press the
MFK for the fixture you require – the LCD above it will change to show the
fixture assigned to the MFK and the DMX address for this fixture. There are
10 pages of 20 fixtures available.
When you have assigned the fixture type to the required fixture selection
key(s), press ENTER to return to the Patch options.
Note – Fixture Types
The complete Zero 88 Fixture Library is stored on the desk, but it is also
possible to load additional fixture types from memory stick. If the fixture type
you require is not in the fixture library on the desk you can import the fixture
type – see Setup chapter of the User Manual for full details.
Auto Menus
The desk can generate automatic groups, palettes and macros based on the
different fixture types that have been assigned.
To generate any or all of these items, press the [Auto Menus] MFK, then
press [Create Auto Groups], [Create Auto Palettes] or [Create Auto Macros]
MFK.
For further details see the Setup chapter of the manual.