Instruction manual

Quick Start Guide
Solution & Solution XL Operating Manual – Issue 1.0 Page 29
Saving Shows
The Solution & Solution XL saves the show automatically to its internal
memory at regular intervals. External backups of the show data can be made
to a USB Storage Device (eg memory stick).
Connect your storage device to one of the USB ports on the desk.
Press the [Files] MFK or select the [Files] button on the Setup Window.
Press the [Save Show] MFK or select the [Save Show] button on the monitor.
The Save Show window is displayed on the monitor. Select the required
Destination Device, by pressing the relevant MFK. If you do not see your
device immediately, press Refresh.
Now you can enter a name for the show file, using the MFKs like a mobile
phone text message. You can also use the on-screen keyboard at this point,
or a USB keyboard, if required. This name will be used as the file name on
the destination device, so ensure it is unique and easily identifiable. Once you
have entered the name, press ENTER, then press the [OK] MFK to save the
show.
Figure 10 - Saving a Show
Loading Shows
Note: Loading a show file will clear any existing show data from the
desk so ensure that you have backed up your previous show before you
load another one onto the desk.
Figure 11 - Loading a show
To load a show, connect the storage media to a USB port on the desk.
Press the [Files] MFK, then press the [Load Show] MFK The Load Show
window is displayed on the monitor. Select the required source device, using
the MFKs.
A list of show files found on the selected device is displayed in the window
(this may require you to use the Page Function to locate your show, if a lot of
files are found on the disk). Select the required show file from the list, then
press the [OK] button to load the show.