Instruction manual

Setup
Page 36 Solution & Solution XL Operating Manual – Issue 1.0
Selecting a Fixture – Manufacturer, Fixture Type and Mode
Press [Add Fixtures], then select the first letter for the required manufacturer
(eg M) then the manufacturer (eg MARTIN) using the MFKs or directly from
the list on the popup window on the monitor.
Figure 17 - Manufacturer Selection
The MFKs and monitor then displays a list of fixture types for that
manufacturer. Some manufacturers have more than 20 fixture types, in which
case the MFKs will need to be paged in order to select the fixture you require.
The Page Up/Down buttons are used to select the required page.
Select the required fixture type (eg MAC 500) using the MFKs or directly from
the list on the popup window on the monitor:
Figure 18 - Fixture Type Selection
If there are several operating modes for the selected fixture type these are
displayed on the MFKs and monitor screen. Select the required mode (eg
Mode 4) and the desk will load the fixture profile, ready for patching.