Instruction manual

Setup
Solution & Solution XL Operating Manual – Issue 1.0 Page 39
Editing Default / Home / Topset Values
Press the [Default] or [Home] or [Topset] button as required on the monitor (if
not already selected).
Use the cursor keys to move the cursor to the individual field to edit or use the
ALL row to edit the value for all of the selected fixtures.
Select the required field, press ENTER, enter the required value and press
ENTER.
Once all changes have been made, press the [OK] key to return to the Patch
screen.
If you make a mistake in Edit Fixtures, or simply wish to revert to the original
values from the fixture library then press the [Reset All] key. If you wish to
cancel all editing of the fixtures, press the [Cancel] key.
Editing Alignment
Press the [Alignment] button on the monitor. Use the cursor keys to move the
cursor to the individual field to edit or use the ALL row to edit the value for all
the selected fixtures.
Figure 21 - Editing Alignment
Select the required field and press ENTER.
Select the Yes or No option as required and press ENTER.
Once all changes have been made, press the [OK] key to return to the Patch
screen.
Editing the Fixture Name or Number
Fixture Names and Numbers can be altered from any of the tabs, simply use
the cursor keys to move the cursor to the Name or Number (No) field for the
selected fixture.
Press ENTER, enter the required fixture name or number and press ENTER.
Once all changes have been made, press the [OK] key to return to the Patch
screen.
Patching Functions
The Patch option in Edit Fixtures provides a simple and clear way to patch or
repatch fixtures, add duplicates, unpatch fixtures and move the location of
fixtures, if required.
The 48 or 96 dimmers on the Solution and Solution XL desks respectively
default to being patched to DMX addresses 1 – 48 or 1 – 96 on universe 1.
In addition to specifying a DMX start address when assigning fixture types, the
desk provides functions that allow you to patch or repatch individual fixtures or
groups of fixtures to DMX output addresses on any of the DMX universes.
It is also possible to patch a fixture to more than one DMX address in one or
more universes. These additional patch addresses are known as duplicates.
Select the fixture(s) to be edited. Click on the [Patch] button in the Edit
Fixtures Window.