Instruction manual

Setup
Page 40 Solution & Solution XL Operating Manual – Issue 1.0
Figure 22 - Editing Patch
The patch table shows the Location (MFK, Preset Fader or DMX In), DMX-In
assignment and DMX address(es) that each of the selected fixtures are
currently patched to.
If a fixture has not been patched to the DMX output then the corresponding
DMX column will show „Add‟
Patching Fixtures
Move the cursor to the DMX column for the required fixture and press the
ENTER key. The Patch Fixture popup window is displayed on the monitor
screen, for example:
Figure 23 - Patching Fixtures in Edit Fixtures
Select the Universe by clicking on the [Universe] button and selecting the
universe from the drop down menu.
Enter the required DMX address in the Address field provided or press the
[Next Address] button to automatically pick up the next available patch
address in the selected universe.
Press the [OK] button to complete the patching operation or the [CANCEL]
button to cancel.
Adding Duplicates
Move the cursor to the Duplicate 1 column for the required fixture and press
the ENTER key. The Patch Fixture popup window is displayed on the monitor
screen.
Select the Universe by clicking on the [Universe] button and selecting the
universe from the drop down menu.
Enter the required DMX address in the Address field provided or press the
[Next Address] button to automatically pick up the next available patch
address in the selected universe.
Press the [OK] button to complete the patching operation or the [CANCEL]
button to cancel.
To patch further duplicates for the selected fixture move cursor to the
Duplicate 2 Column, Duplicate 3 column etc and repeat the above procedure.
When duplicates are patched for the selected fixture(s) additional columns are
added to the Edit Fixtures table (one column per duplicate address).