Instruction manual

Setup

Solution & Solution XL Operating Manual – Issue 1.0 Page 41

Repatching Fixtures

Move the cursor to the DMX or Duplicate N column for the required fixture and

press the ENTER key. The Patch Fixture popup window is displayed on the

monitor screen with the current patch address in the DMX Address field, for

example:

Figure 24 - Repatching Fixtures in Edit Fixtures

Select the Universe by clicking on the [Universe] button and selecting the

universe from the drop down menu.

Enter the required DMX address in the Address field provided or press the

[Next Address] button to automatically pick up the next available patch

address in the selected universe.

Press the [OK] button to complete the patching operation or the [CANCEL]

button to cancel.

Unpatching Fixtures

Move the cursor to the DMX or Duplicate N column for the required fixture and

press the ENTER key. The Patch Fixture popup window will be displayed on

the monitor screen with the current patch address in the DMX Address field.

Press the [Unpatch] button. A confirmation popup window will be displayed.

Select the [Yes] button to comfirm the operation.

Multi-Part Fixtures

For multi-part fixtures (eg Lamp + Scroller) the different parts of the fixture are

displayed on separate lines in the Edit Fixtures table. There is an additional

column (Part) to show the part name of the multi-part fixture and a [Fixture

Part] button to select which part of the fixture is displayed (eg All Parts, Lamp,

Scroll). For example:

Figure 25 - Multi Part Fixtures in Edit Fixtures