Instruction manual

Setup
Solution & Solution XL Operating Manual – Issue 1.0 Page 43
This field may be blank (ie no DMX In control), or a value between 1 and 512.
Clicking on an entry in this column allows you to change the DMX In address
assigned to the fixture.
Figure 27 - DMX In settings in Edit Fixtures
Where a DMX-In Dimmer exists only on the DMX-In, the default fixture
numbers start at 1001 onwards, relative to the DMX address of the fixture
assigned, for example:
Figure 28 - DMX In Fixtures in Edit Fixtures
Changing Fixture Type
This option allows you to swap one fixture type for another. Individual fixtures
or groups of fixtures may be changed in one operation.
The desk attempts to clone the programmed data for the swapped fixture(s) in
memories, submasters and palettes as far as possible. Parameters in the new
fixture type that were not present in the original fixture are left unprogrammed.
Select the fixture(s) to be changed. Select the [Patch] button in the Edit
Fixtures Window: