Instruction manual

Setup
Page 48 Solution & Solution XL Operating Manual – Issue 1.0
Desk Setup
The Desk Setup function allows you to configure or customise the settings on the desk to your own requirements. Desk Setup is divided into several sections which
are accessed by pressing the corresponding MFK or selecting the option on the monitor screen:
Figure 33 - Desk Setup
A summary of the Desk Setup options is provided below.
 Displays – Adjust the brightness and contrast of the Main LCD and other
LCDs on the front panel; calibration of external touch screen monitor;
screen timeout.
 Peripheral - Allow mouse or trackball to control pan and tilt parameters;
adjust control wheel sensitivity.
 Inputs – Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI
Notes; Configure Remote Switches
 Outputs – Map DMX universe to physical DMX outputs on the desk.
 Behaviour – Confirm Overwrites; Recovery Mode; Preset Mixing; Keep
Parameters Separate options.
 Event Monitor – Allows you to test and view any software events, for
debugging purposes.
 Memory Defaults – Set up the default delay and fade times for each
attribute (Intensity, Colour, Beamshape, Position); Move on Dark
parameters.
 Submaster Defaults – Set up default options for flash button action,
trigger level and attribute fade times.
 Set Date – Set the date on the desk.
 Set Time – Set the time on the desk.