Instruction manual

Setup
Solution & Solution XL Operating Manual – Issue 1.0 Page 49
Displays
Press the [Displays] MFK or select the [Displays] button on the monitor. The various options are shown on the MFKs and monitor. These are summarised below:
Figure 34 - Desk Setup (Displays)
 Colour Scheme – allows you to select a new colour scheme, if required.
 Screen Timeout (mins) – This is the time after which the Main LCD,
Wheel LCD, MFK LCDs, Submaster LCDs and external monitor screen
will be turned off if the desk has not been used. If set to 0, the desk will
never time out.
If the timeout period is reached - the front panel LCDs and monitor screen
will be turned off. To restore the LCDs and monitor screen, press any key
on the front panel of the desk.
 Main LCD Brightness and Contrast defines the brightness and contrast
of the central, Main LCD.
 Other LCD Brightness and Contrast define the brightness and contrast
of the other LCDs on the console.
 Monitor Calibration – Calibration of external touch screen monitor. With
an external touchscreen connected via USB, press the [Calibrate] soft key
and follow the instructions on the monitor.
The touchscreen drivers currently supported by Solution & Solution
XL are listed later in this user manual – see page 153 for a full list
 LCD Font Size – This setting allows you to modify the font size, for clarity
or quantity of information, as required.