Instruction manual

Setup
Page 58 Solution & Solution XL Operating Manual – Issue 1.0
Files
This section of Setup allows you to save and load show files, load User Fixture Types (UFT) from a memory stick, clear UFTs from the desk, update the desk
software and display desk information.
Saving Shows
To save a copy of your show, you first need a storage media. The Solution & Solution XL desk is supplied with a USB flash memory stick, although other storage
media may be used with the console. Connect your media to a USB port on the desk (any port will do). If using an external floppy drive, remember to insert a floppy
disk into the drive.
Press the [Files] MFK or select the [Files] button on the Setup Window.
Press the [Save Show] MFK or select the [Save Show] button on the monitor. The Save Show window is displayed on the monitor:
Figure 44 - Files (Save Show)
Select the required Destination Device.
Move to the Filename field and enter a name for the show file. This name will
be used as the file name on the destination device, so ensure it is unique and
easily identifiable. The name can be entered using the MFKs – hold SHIFT to
enter a lowercase character.
Select the required Save Options. This defaults to Save Complete Show but
you can just save the Setup or Setup and Palettes if required.
Press the [OK] button to save the show.