Instruction manual
Setup 
Page 74      Solution & Solution XL Operating Manual – Issue 1.0 
Zero Wire 
Zero Wire DMX is a wireless DMX transmission system from Zero 88.  The 
system  can be  output directly from the  console  via the  [Network] options  in 
Setup, and can then be routed via a Wireless Access Point to Zero Wire DMX 
boxes which decode the signal to DMX for linking to fixtures and dimmers, etc.  
In the Zero Wire setup page there are a host of options, which enable each 
DMX Universe on  the  desk  to be  routed to  an  IP address  with a  unique 
Universe number (see below). 
Figure 59 - ZeroWire Configuration 
For  more  information,  see  the  Zero  Wire  DMX  user  manual,  which  can  be 
found on the Zero 88 website. 
Note:  The  new  ZeroWire  CRMX  products  do  not  use  Zero  Wire 
communications protocol – they can be defined to use sACN or Art-Net 
as required.  This section is for support of the older Zero Wire products 
only. 
Wings 
It  is  possible  to  connect  Ethernet  based  playback  wings  to  the  Solution  & 
Solution  XL.    These  wings  can  then  be  mapped  to  expand  the  front  panel 
controls of the console. 










