Instruction manual

Programming
Solution & Solution XL Operating Manual – Issue 1.0 Page 81
Window Setup
The Program Window (and Output Window) have a variety of Setup options to
determine their style and display options. These are accessed using the
Window Setup button.
Parameter Values
Parameter values may be displayed in %, DMX or detail names as follows:
Select the [Details (%)] soft button (this is also found on Special Page 1). A
drop down menu is displayed with the following options:
 Percent – When this option is selected all the fixture parameter values
are displayed as percentages (ie 0 – 100% for both 8 bit and 16 bit
parameters).
 DMX - When this option is selected all the fixture parameter values are
displayed as DMX values (ie 0 - 255 for 8 bit parameters or 0 - 65535 for
16 bit parameters).
 Details (%) – When this option is selected the fixture parameter values
will be displayed as the parameter detail names (eg Red, Gobo 1) where
they are defined in the fixture data. If parameter details are not defined,
the window will show the actual numerical values in %.
 Details (DMX) – When this option is selected the fixture parameter values
will be displayed as the parameter detail names (eg Red, Gobo 1) where
they are defined in the fixture data. If parameter details are not defined,
the window will show the actual numerical values in DMX (0-255 or 0 –
65535).
Hide Unpatched
The Hide Unpatched option can be used to remove unpatched dimmers from
the Program and Output windows to clear the display up. This option is
enabled by default.
Window View
There are several window views available. The default is Channel View,
which will be the most familiar to most users.