Instruction manual

Programming
Solution & Solution XL Operating Manual – Issue 1.0 Page 87
Fan V Mode
The parameter value on each of the selected fixtures increases or decreases
by a different amount from their original values, depending on the fixture
number. The value of the middle selected fixture will be locked. Example –
Fan-V Mode (Fixture 3 locked):
Fixture Parameter
Fixture 1
Fixture 2
Fixture 3
Fixture 4
Fixture 5
Original Value
50
50
50
50
50
New Value
70
60
50
60
70
Change in Value
+20
+10
0
+10
+20
Changing Wheel Editing Modes
To change the normal or shifted wheel editing mode – hold down the SETUP
key and press the required attribute key (eg COLOUR). The MFKs change to
show the various setup options for the selected attribute.
Figure 66 - Select Colour Wheel Edit Mode
Select the [Normal Wheel Mode] or [Shifted Wheel Mode] key as required.
The MFKs change to show the wheel editing modes available.
Select the required wheel editing mode (eg Absolute). The MFKs return to the
attribute setup options. Select the [OK] key to complete the operation.