User Guide
ZEROtherm CF700, CF800, CF900
4pin 3wire with automatic control by temperature sensorConnector
L100 x W94 x H77Size(mm)
900 ~ 2300 ± 10%Fan Speed(rpm)
16 ~ 30 ± 10%Noise(dBA)
562357342Weight(g)
CopperAluminumAluminumHeatsink Material
4EA4EA(Nickel Plating)3EA(Nickel Plating)Heat Pipe
CF900CF800
Intel LGA775 Socket (Pentium 4, Pentium D)
CF700
Platform
Models
Items
CPU Cooler
(CF700/CF800/CF900)
Back Plate Spring Screw Thermal Grease
1) Remove the paper film from the upper surface of a back plate to use an
insulating tape.
2) Attach the back plate to the back side of a motherboard with the socket RM
(Retention Mechanism) holes lined up.
3) Place the cooler on a CPU with all of mounting screw holes well aligned.
4) To guarantee the maximum cooler performance of the heat pipe-based cooler,
ZEROtherm, the RIGHT installation to the right DIRECTION is VERY important
as shown in picture (1). The rests (2-4) are NOT PROPERLY installed ones.
5) Fasten the spring screws fitting on the RM holes.
Patent for Design : 30-2005-0023049
Registered Trademark : 40-0564565-0000
Please read this installation guide carefully before installation
① : (O) ② : (X) ③ : (X) ④ : (X)
Warranty : 1 year from the date of purchase with a proper receipt.
Exception : Warranty does not cover products broken by user’s fault.
URL : http://www.apack.net
Email : service@apack.net
Components
Features
Patent
Specifications
Warranty
Model
Installation
CPU Temp. (
o
C)
Fan Speed (rpm)
2300
900
Internet, Music
3D Game, Animation
1) Copper-based heat pipe cooling system for maximum thermal performance.
2) MAX performance and MIN noise with optimized heat block and fin structure.
3) The upscale exterior with nickel-plated heat pipes and a transparent fan
4) Slim design to fit nearly all PC cases available in the market.
5) Model: CF700 & CF800 Extremely light weight (under 360g) with aluminum fins
6) Model: CF900 Maximized performance with copper fins
Bent Heat Pipes Memory Slot
Installation Guide