Installation guide

Zetadocs for NAV Installation Guide
This edition 5
th
December 2012 © Copyright Equisys plc 2012 All trademarks acknowledged All rights
reserved
Page 110
The Zetadocs Server processes the batch and submits the split documents to your Document Queue using
the specified splitting method, these are:
 Page Interval - The Zetadocs Server splits the batch of documents using a constant page interval
which can be configured, e.g. resulting in the batch being split every 4 pages.
 Barcode - The Zetadocs Server reads the document and splits it on detecting a barcode. If you are
using a barcode as a whole splitter page, if for example you were adding specific barcode pages to
separate the batch, you may want to delete the split page. In this case the Zetadocs Server can be
configured to discard the splitter page automatically.
 Barcode value change - If you are scanning batches with barcodes on each page, the Zetadocs
Server splits the document each time the detected barcode value changes.
Note: The barcode batch splitting methods require Capture Plus and the Abby Software installed and
configured. If you are scanning documents that contain several barcodes on the same page, a filtering prefix
can be configured exclude all barcodes without a specific prefix.