Installation guide

Zetadocs for NAV Installation Guide
This edition 5
th
December 2012 © Copyright Equisys plc 2012 All trademarks acknowledged All rights
reserved
Page 118
21. Testing Delivery and Capture Plus
You may wish to test on a mixture of the NAV classic and Role Tailored Clients as required by the systems
specifications to ensure all functionality operates as expected.
21.1 Creating Documents using the Custom Document Queues
The Custom Document Queues have the capacity to generate a number of different documents within NAV
based solely upon the requirements of the system. As these can take a number of forms you should do a
test for each that you intend to implement in the system in the manner it is likely to be used. The example
below will look at testing a Shipment Document Queue.
Creating a Document using Custom Document Queues
 Open NAV and open the Zetadocs Shipping Document Queue.
 Ensure the queue is populated with a selection of sample or test documents.
 Select one of the items from the queue and select Archive.
 The available Actions should be listed. Ensure your Actions are all displayed.
 Select each in turn and create and send a document.
 Repeat this process for the other queues as required.
 Open the SharePoint Archive and ensure the documents have been archived and sent as expected.
Bespoke Solutions
The main benefit of Zetadocs Delivery and Capture Plus is its ability to make a solution specific to your
needs, as such it is difficult to provide a comprehensive set of testing instructions. We would recommend
that you attempt to use your modifications in a manner consistent with their intended deployment, with
special attention on any bespoke business logic used.