User manual

13
MAINTAINING /
TESTING YOUR
DETECTOR
Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home
when maintained properly. To maintain your
Zetadetectorinproperworkingorder,andto
ensure that the sensor will last for the lifetime of
theproduct,itisrecommendedthatyou:
•Testthesounder,powerpackandcircuitry
ofyourdetectoratleastonceperweekby
pressing the Test/Reset button briefly (see
page 9).
•PerformtheSensorTestonceeverymonth
(see page 9).
•Keepthedetectorfreeofdustbygently
vacuuming the case with a soft brush
attachment once per month.
To prevent the possibility of contaminating the
sensor in your detector and thus affecting its
reliability:
•Neverusecleaningsolutionsonyour
detector. Simply wipe with a slightly damp
cloth.
•Donotpaintthedetector.
•Donotsprayaerosolsonornearthe
detector.
•Donotuseanysolventbasedproducts
near the detector.
•Movethedetectortoasafelocationand
store in a plastic bag before painting, wall
papering, or performing any other activities
using substances that emit strong fumes.
Remember to remove it from the bag and
replace the detector when these activities
are finished.
Failure of any test should be reported to
the technical support line (see page 19 for
contact details).
Do not attempt to repair your CO detector.
Do not remove any screws or open the main
casing of your detector. Any attempt to do so
may cause malfunction and will invalidate the
warranty.