User manual

7
•Wheredirtanddustmayblockthesensor
•Inadamporhumidlocation(forexample
in a bathroom)
•Intheimmediatevicinityofthecooking
appliance
WARNING: Prolonged exposure to
temperatures outside those stated above
will reduce the power pack and sensor life.
HOW TO INSTALL
YOUR DETECTOR
NOTE: This apparatus should be installed
by a competent person who feels able to
install it according to the instructions.
Firstly write the installation date on your
detector in the area provided. We recommend
that your detector is installed on the wall.
To mount on a wall or ceiling:
Please ensure that you use the screws provided,
as they were chosen specifically for use with
this product. Use template below for guidance
onmarkingholepositions.Drillholesintothe
wall. Insert the plastic wall plugs. Screw in
the screws. Ensure screws are protruding from
thewallby3mmtoallowdetectortoslotonto
screws.
To place on a shelf:
The base of the detector has been designed
to allow it to stand freely on a shelf.
WARNING: When placing on a shelf,
please adhere to the same positional
recommendations as described on page 5
and 6.
66mm
Drill hole spacing