Specifications

107

Voice Prompts

Security/Function Code

(checked or unchecked)

Thank You

(checked or unchecked)

Secs Paging and Insure

(0 to 255 seconds)

This is the limit (in seconds) for the Client Personalized Paging and Insure greeting. A

greeting longer than this value is automatically shortened. (This value is the time limit that

the client speaks during recording, before any silence compression happens.)

Unchecked Callers hear the standard beep tones from the system to prompt for

input.

Tip Typically, you will set the message prompt to “unchecked” if the

Welcome prompt is “

C”. Clients usually say in their custom prompts

how callers should leave a message; you do not want to repeat the

instructions with this prompt.

Option Description

Checked Callers hear the system voice prompts when the paging terminal

prompts for a security code, or function code to be entered.

Unchecked Callers hear the standard chirp tones from the system to prompt for a

security/function code to be entered.

Option Description

Checked Callers hear the system voice thank you message at the end of each

paging call.

Unchecked Callers hear the standard 5-beep tones from the system.

Note The system thank you voice prompt is a good place to do a little

advertising such as “Thank you for calling Beep 1”. Callers can

always hang up if they do not want to hear it all. If you want to use

the call recycling feature (see the

Paging and PageSaver

on page

21), be sure to set the Thank you prompt to Y for all subscribers

who have the recycle privilege.