Specifications

Managing the Subscriber Database with ZbaseW
108 025-9034AA
Secs Mailbox and Notify Limit
(0 to 255 seconds)
This is the limit (in seconds) for the Client Personalized Mailbox and Notify greeting. A
greeting longer than this value is automatically shortened. (This value is the time limit that
the client speaks during recording, before any silence compression happens.)
Secs Announce Mode
(0 to 255 seconds)
This is the limit (in seconds) for the Client Personalized Announcement Greeting. An
announcement longer than this value is automatically shortened. (This value is the time
limit that the client speaks during recording, before any silence compression happens.)
Modes Allowed
You fill in these three fields to define what actions are available to this subscriber for
systems with PageSaver. The acceptable values are P (Paging), I (Insure), M (Mailbox), N
(Notify), A (Announce), T (Talkback), F (Internal Forward 1), and 2 (Internal Forward 2).
Only one mode is active at any one time, but up to three can be defined to support mode
switching. A mode letter can only be used once For example, if the first mode is I, you
cannot put I in the second or third modes.
A new window will pop up after you select a mode (usually). The exact contents of the
pop-up will depend on the paging format set for this subscriber and the mode of operation
just selected. For the purposes of providing an example with each mode, a subscriber set to
the 2-tone format is being used for modes P, I, M, and T.
Paging
A “P” in one of the Modes Allowed fields supports radio Paging Service for this
subscriber. A sub window pops up after the “P” is entered, but exactly which sub window
depends on which paging format was entered in the Format field of the Status window.